Canon is a well-known printer brand that is known for producing high-quality, reliable printers. Canon printers, like any other mechanical system, can develop errors that require immediate attention. Canon printer error 5200 is one of the most common errors (support code). We’ll go over the causes of this error and how to fix Canon printer error 5200 in simple steps in this guide. So, if you carefully read this guide, you should be able to solve this problem without difficulty.
Why Canon Printer Error 5200 Occurs?
Cartridge issues are the most common source of Canon printer error 5200. It may be due to a lack of ink in your cartridge. It may be because of low ink levels in your cartridge, a defective cartridge, or a problem with your printer’s logic board. We know that Canon printers are equipped to print in black even though the black cartridge is empty since the colours in the colour ink cartridge are used. If you’re getting error 5200 on your Canon printer, it’s because your printer cartridges are either empty or nearly empty. Let’s talk about how to fix this error now that you know what’s causing it.
How to Resolve Canon Printer Error Code 5200?
For the most part, there are three simple solutions for the Canon printer error 5200. We’ve gone through each one individually, and you can try each one until the problem is resolved.
Solution 1: Refill All of your Cartridges/ink Containers.
1. Check the ink levels in your black and coloured ink cartridges and get them refilled if required.
2. Once you’ve filled the black cartridge, make sure you’ve filled the colored ink cartridge as well. You’ll get this error if you don’t.
Solution 2: Clean Cartridge / Print Head Manually
1. Unplug your printer’s power cable and keep it turned off for one hour.
2. Next, remove the ink cartridges from your printer and thoroughly clean their heads.
3. Replace the cartridges, reconnect the power cord, and restart your printer to see whether the error has been resolved.
Solution 3: Reset the factory (default) settings on your Canon printer.
We’re going to reset the printer settings to factory defaults with these steps.
1. To turn off your printer, press the ‘ON’ button.
2. Wait for the printer to turn off before proceeding.
3. Now, with your right hand, press and hold the ‘Stop’ button while simultaneously pressing and holding the ‘ON’ button with your left hand. After 2-3 seconds, release the ‘Stop’ button and continue to hold the ‘ON’ button with your left hand.
4. Push the ‘Stop’ button 5 times while holding the ‘ON’ button. The yellow triangle light below should be turned on and off each time you click the Stop button at intervals of about 2 seconds.
5. When you remove all of the keys, the LCD display will go blank, but the ON button will start to blink. This indicates that your printer is about to be reset. If your computer tells you that it’s installing new hardware at this stage, ignore it.
6. When the ON button stops blinking and displays a steady green light, you’re done. Wait for your printer to turn off after pressing it once.
7. Take the cartridges out of the printer. Clean the printhead completely before replacing the cartridges in the printer. Then, to turn on your printer, click the ‘ON’ button.
That is everything there is to it. You should now try printing, and your printer should work normally.
In this article, you learned three tried and tested methods for resolving Canon Error 5200, which is commonly encountered in Canon printers. If the problem hasn’t been resolved in your case, start a discussion in the comment section below.