After Windows, Mac is the second most widely used computer operating platform. Mac OS also has the bad side of errors on Windows. One frustrating error experienced by Mac users is that “the operation cannot be completed because one or more items required cannot be found. (Error code -43) “I will explain briefly how to fix Error code 43 in this article.
What is Mac Error-43
Error code 43 appears with a message that reads “The operation cannot be completed because one or more items are not available. (code of error -43).”
This error usually occurs when you try to delete a file and transfer it to the trash or move files around. Not everyone encounters this mistake, though. This error rarely occurs except on OS X El Capitan or OS X 20.2 systems, according to the data collected. So, if you face this problem, you don’t have to worry because this error can be fixed easily.
Causes for Error code 43
We’re not computer science wizards, so we don’t have to know every reason behind every error. However, we should learn about things on your Mac that can or could causeError-43 to fix it. I suggest you do not skip this section and read the reasons for the appearance of Error-43. We are often the ones who cause this error, so it’s better if we know what’s behind the error to fix it and prevent it.
(i) Illegal Characters
This error could be caused if the file name contains one or more so-called illegal characters. Here is a list of characters that are considered illegal:@! #percentage ^ $. Therefore, always try to avoid using these when your files are named. If you try to move some files that have these characters in their name, the error may appear and you can just rename them.
Error-43 may also occur if the selected file does not have a shared point. This just means the finder can’t access the file you’re trying to move.
(iii) Incomplete Download
If the file you are trying to move is not fully downloaded, this error may also appear. To avoid this error, always check whether the file is completely downloaded before it is moved to trash or elsewhere.
(iv) Locked or Active File
can also occur if the file you want to move is in use or locked. In these cases, before moving, you should stop using the file or unlock it. In addition, sometimes you need administrator permissions to move a file.
(v) Hard Drive
A problem with the hard drive is also a possible reason for the occurrence ofError-43 in your Mac PC.
How to Fix Mac Error Code 43
You need to fix this too manually, like any other error. In order to learn how to fix it, I advise you to use the step-by-step guide to the methods I provide to successfully apply them. I’m presenting the three best methods for fixing Error-43 that will certainly help you in one way or another.
1. Reset PRAM or NVRAM
PRAM or NVRAM is a random access memory parameter or non-volatile random access memory. Mac OS uses a small amount of memory to save certain settings to quickly access them. For most systems, resetting PRAM or NVRAM works like charm. Follow these steps to do so:
Step-1: Firstly, shut down your Mac PC normally.
Step-2: While it shuts down, locate the Command, Option (alt), P and R keys.
Step-3: Turn on your PC again and press the Command + Option + P + R keys simultaneously before the grey startup screen shows up. That’s why I asked you to locate them beforehand.
Step-4: Hold these keys until you hear a startup sound three times and then finally release the keys.
This way you will reset the PRAM and it will further fix the Error-43 in your PC.
Note: If you don’t hear the sound of the startup in step 4, turn off your PC again and follow the required steps. If the problem continues, scroll down and try the next method.
2. Use Disk Utility
You should check the permission problem or corruption of the directory because the Error-43 is often associated with corrupted or missing files. The Disk Utility tool comes into play for this purpose. It is an integrated tool that addresses drive-related problems. By following these steps, you can try:
Step-1: Firstly, go to the Apple menu present at the top left part of your screen and click on Restart.
Step-2: After your PC restarts, press and hold the Command + R key simultaneously until you see the Apple logo.
Step-3: Now click on the Disk Utility option and then Continue.
Step 4: Go to the left panel and select the disk you want to repair (disk where the file is present). Then press the First-Aid button and continue the check process for Disk Utility.
Step-5: Disk Utility may give you several reports and you must take action accordingly.
If your disk is about to fail, back up all your data immediately and buy a new disk to replace it. If the Disk Utility tool reports that there are no problems or the problems are solved, you can just leave the tool. In this case, you can view the problems resolved by clicking on the Details display.
Also Read: Fix Spotify Error Code 18
3. Delete Locked Files
If the main cause ofError-43 in your Mac PC is the locked files, this method works perfectly for you. You can delete them without first unlocking them. Follow the following steps:
Step 1: Turn on your system first and follow this path: Application-> Services-> Terminal.
Step-2: Type and execute this command in the terminal: chflags -R nouchg .
Step 3: Empty the trash now. You can do this by double-clicking the Trash icon, pressing the Command + A key to mark all files and then dragging the files from the Trash to the Terminal.