When you use your computer and try to use an installed peripheral device, the Windows error code 36 can occur. Windows allocates computer resources to each device and sees a conflict in the resources that this device tries to use and can therefore not interface with the device.
Fixing Windows error code 36 is a fix that only advanced computer users should implement. The problem’s source is the BIOS setting. A computer’s BIOS is the lower-level firmware that gives your motherboard and other hardware directions.
If you don’t trust your computer skills when it comes to making changes to the BIOS, you should be assisted by a seasoned computer professional. Changing the wrong BIOS setting inadvertently can make the entire computer unusable. When editing the BIOS of your computer, use extreme caution.
The BIOS version and your PC options are likely to be very different from other computers. Each computer manufacturer and each computer model uses a different BIOS. Don’t assume that a fix that works for one computer works for your computer. You must refer to the documentation that came with your computer or motherboard before this error can be resolved.
Get all relevant computer information, including model number and motherboard build. Once you have the information and documentation for your computer, see the manufacturer’s website to see what BIOS settings need to be changed and how to make the changes.
For every type of Windows error imaginable, some hardware manufacturers have documented fixes. Other companies may not have a documented fix, so you may need to contact your customer service and tell them the error and all your information about your computer.
There is no single Windows error scenario 36. Before you try to fix this problem, make sure you have the right information from the manufacturer of your hardware.